Ford F250 ball joints
MIVO offers a high-strength aftermarket Ford F250 ball joint replacement kit with rebuildable steel bar structures and greaseable parts to extend service life and reduce total replacement cost.
Features & Benefits of Our Ford F250 Ball Joints
- Durable Construction: 4140 chromoly steel forgings for 6,000 lb axle loads.
- Rebuildable Design: Replace bearings and dust boots for extended life.
- Greaseable Socket: Easy maintenance—no special tools needed.
- OEM Fitment: Direct bolt-in replacement for Ford F-250 Super Duty models.
- Cost-Effective: Reduce your Ford F250 ball joint replacement cost by up to 35%.
OEM Number: 8C3Z3050D
| Replaces | 8C3Z3050DA, 5C3Z3050DA, F6TZ3050FB, F6TZ3050AB, E7TZ3050B |
| Outer diameter 1 [mm] | 41,5 |
| Cone Size [mm] | Ø22,5 |
| Weight [kg] | 0,74 |
| Positions | Front Lower left right |
| Vehicle Fitment | |
| 1987-1999 Ford F-250 | |
| 1999-2022 Ford F-250 Super Duty | |
OEM Number: 5C2Z3049AA
| Replaces | YC2Z3049AA, 5C2Z3049BA, 8C2Z3049B, 8C3Z3049B, F5UZ3049A, F2UZ3049A |
| Outer diameter 1 [mm] | 41,5 |
| Outer diameter 2 [mm] | 21 |
| Weight [kg] | 0,4 |
| Positions | Front Upper left right |
| Vehicle Fitment | |
| 1993-1997 Ford F-250 | |
| 1999-2010 Ford F-250 Super Duty | |
OEM Number: BC3Z3050B
| Replaces | 1C3Z3050AB, 1C3Z3050BA, 2C3Z3050AA, 2C3Z3050BA, 4C3Z3050BA, 5C3Z3050AB, F6TZ3050GA, F6TZ3050HA, 5C3Z3050AA, F2TZ3050A, 5C3Z3050A, 5C3Z3050E |
| Diameter 1 [mm] | 50,3 |
| Outer thread 1 | M22x1,5 |
| Weight [kg] | 0.6 |
| Positions | Front Lower left right |
| Vehicle Fitment | |
| 1980-1999 Ford F-250 | |
| 1999-2022 Ford F-250 Super Duty | |
OEM Number: 4C3Z3049DB
| Replaces | 2C3Z3049DA, 4C3Z3049DA, F6TZ3049AA, F6TZ3049DA, F6TZ3050FA, EOTZ3049A, 8C3Z3049A, F3TZ3049A |
| Outer thread | M16X1,5 |
| Body Diameter | Ø44,4 |
| Weight [kg] | 0,55 |
| Positions | Front Upper left right |
| Vehicle Fitment | |
| 1980-1999 Ford F-250 | |
| 1999-2022 Ford F-250 Super Duty | |
OEM Number: 2L3Z3050AA
| Replaces | 7L5Z3050A, BL5Z3050A, F57Z3050BB, MCF2233, YL2Z3050AA, ZZP034550C |
| Cone Size [mm] | N/A |
| Body Diameter | Ø44,4 |
| Weight [kg] | 0,59 |
| Positions | Front Lower left right |
| Vehicle Fitment | |
| 1997-2004 Ford F-250 | |
OEM Number: 2U2Z3V050A
| Replaces | F57Z3V050BB, F8AZ3050A, F8AZ3050AA |
| Cone Size [mm] | N/A |
| Body Diameter | N/A |
| Weight [kg] | 0,54 |
| Positions | Front Lower left right |
| Vehicle Fitment | |
| 1997-1999 Ford F-250 | |
FAQ:
Replacing the ball joints on a Ford F-250 Super Duty requires a robust C-frame ball-joint press equipped with Ford-specific adapters or a dedicated “one-and-done” tool, along with the correct receiving cups and press sleeves to safely remove the old joints and press in the replacements without damaging the control arms.
Replacing the front ball joints on Ford F-250 Super Duty involves removing the wheel, brake, hub, and steering knuckle assemblies to gain access, then using a C-frame press to remove the sealed lower joint from the control arm and install the new one, followed by separating and pressing out the upper joint, and finally reassembling all components and performing a wheel alignment.
Listen for clunks, check for steering play, and inspect for grease leaks or torn boots.Please read for details
signs of bad ball joints